Features of oil filter:
1. The product structure is more reasonable
2. The strength of the parts is more reliable
3. The product adapts to higher temperature and corrosive requirements
4. Low pressure difference, long life, smoother oil
The main function of the oil filter is to clean the engine oil, and the oil is to minimize the friction generated by the surface of the parts during operation, so as to reduce energy loss and part wear. The machine filter can effectively remove the dust in the oil. Impurities such as metal particles, carbon deposits and soot particles can effectively protect the engine from wear. The temperature of engine oil varies widely, generally ranging from 0 to 140°C. Under severe temperature changes, the concentration of engine oil will also change, which will affect the amount of oil filtered. Inferior oil filter not only affects the normal oil supply and lubrication of the engine by the oil pump, but also due to rough manufacturing, the interface of the main oil passage may be leaky, causing oil to leak from the interface between the engine filter and the cylinder block. , As a result, it will cause oil leakage, poor engine heat dissipation and other failures, and in serious cases, the cylinder will blow up. The high-quality machine filter can effectively filter the impurities in the oil while ensuring sufficient flow under severe temperature changes.
機油濾清器的特點：
1、產品結構更為合理
2、零件強度更為可靠
3、產品適應更高溫度及腐蝕性要求
4、低壓差，長壽命，機油更順暢
機油濾清器的主要作用是清潔發動機機油，而機油是為了大限度地減少各零部件表面在運行過程中產生的摩擦，以降低能量損耗和零件磨損，機濾能有效除去機油中的灰塵、金屬顆粒、碳積淀物和煤煙顆粒等雜質，有效保護發動機的磨損。機油的溫度變化范圍很大，一般是從0~140°C不等，在劇烈的溫度驟變下，機油的濃度也會發生變化，這將影響到機油的過濾量。劣質機油濾清器不僅影響機油泵對發動機正常的供油潤滑，而且由于粗制濫造，主油道的接口處可能會有密封不嚴的情況發生，造成機油在機濾與缸體的結合面竄出，結果就會造成機油滲漏，發動機散熱不良等故障，嚴重時還會爆缸。優質的機濾能夠在劇烈的溫度變化下，在有效過濾機油中的雜質的同時還能保證足夠的流量。
